How to read - charts. Why?
You may ask : "Why should I bother learning how to read pressure-enthalpy scheme?" Because your time is limited and very valuable, that's a good question. The use of P-H schema is an important skill for which we have laid the Foundation in GTAC I, Module 1, " Introduction In the Refrigeration and Module2, Temperature and Pressure. There we were escorted heat with temperature-enthalpy (T-H) graphics. We also used the T-x diagrams showing the heat transfer to the evaporator and condenser in this module. Now we transfer this understanding T H chart P-H chart for the following reasons:
- Help to eliminate mechanical cooling systems,
- Help you see the function of each part of the mechanical refrigeration system and how they work together to change of pressure and heat transfer,
- Help you predict the temperature and pressure, you should expect to find in various places within the system,
- To give you an important tool for studying other principles relating to the cooling system, which will be presented in subsequent modules.
You can work without an understanding of the P-H scheme, but you can make your work easier, better, and more profitable, if you master this technique and use it...
|