Summary Refrigerator Servicing Mechanism
If this chaptcr been thoroughly examined, be aware of the following important shingles:
- Liquid refrigerant should be restored from that part of the mechanism will be reviewed.
- It is necessary to equalize the pressure in the unit before dismantling.
- All refrigerant holes should be connected immediately after dismantling.
- Put in the new strip, where pads are used.
- When assembling the removal of air and moisture from the lines. In addition, the removal of moisture from the ambient air from the fact that part is exposed to the air. This can be done by cleaning, or deep evacuation.
- Keep within the system clean.
- Remove any part, near the nearest valve between this part and the liquid receiver. Evacuate the device with the help of the compressor, condenser and receiver fluid.
As a rule, it is advisable to take a big overhaul in the shop. At the same time, replace the unit with the time. In doing so, the owners may use the system. Before servicing the system, you should review the system wiring diagram and instruction, the complex nature of some systems require management to be used.
..
|