Checking Of The Refrigerant: Liquid Receiver, Capacitor
To determine the amount of refrigerant, check the actual quantity of the refrigerant and the condenser. One way to find out is to determine the high-side water pressure. In a water-cooled Department, head of the pressure must match the refrigerant temperature is about 10F (6C) higher than the temperature at the outlet of the condenser. In wrater temperature, in this case, should be checked, as it leaves the condenser. It should not be tested in the end of a long pipe. Head for 10 psi (69 kPa) below normal and indicates a lack of refrigerant...
|