Home 

Ref-Wiki.com -

Technical information Chillers Multiple Pump Parallel Configuration

Several Pump Parallel Configuration

To ensure that a mixed state there is no water, several pump parallel hmm configuration shown in Fig. 2.5 widely used. In this configuration, each unit has an individual chilled water pump. Thus, when one of the unit is not workingone pump is off, the flow through the non-operating chiller is a zero, not to confuse the results.

Table 2.4 summarizes the performance and temperature conditions for this configuration in different load conditions.

..

 
Thanks ->
Air standard refrigeration cycle Double tube condenser Evaporator Hermetically sealed compressor High pressure float valve Hot gas muffler Oil separator Open air refrigeration cycle Plate surface evaporator Refrigerant drying agents Solenoid valve Specific volume of refrigerant T. H. diagram
Copyright @ 2009 - 2022, "www.ref-wiki.com"