Construction of refrigerating warehouse
Plastic insulating materials rigid, uniform materials, suitable as core structural sandwich panels. This method of manufacture is facilitated by the use of rigid foamed polyurethane, because moisture can be done to foam between the inner and outer panel skins and has good natural adhesion, therefore creating a rigid structural component.
The panel edge-backdrive device can be built in or used on site. To build such a shop, floor first prepared, bringing a vapor barrier on the outer surface. Fragments of the walls erected at the end on the edge of the floor and locked together, making inter-panel printing on the edges and corners. Ceiling panels are fitted over the tops of the walls and sealed in a warm face intersection.
Insulating panels, as a rule, built in the frame of the building so that panel joints are protected from the elements. Long vertical panels can be further enhanced structure. Perhaps with the right for construction and finishing, to build a insulated panels around the internal load-bearing frame.
Various systems and end connection panel methods to suit all situations are available from the suppliers.
Caution must be exercised in respect to the method of support of ceiling panels. Great portal, steel framed buildings may provide an effective outer shell, but have substantial roof of the movement. Panels hung this type of support systems that can take some movement, and the wind, akimbo frame is used to prevent motion..
|
Cold storage