The heat will be removed
Heat can be solved in the condenser shown in p-h chart (Fig. 6.1)and the relatively small heat loss and profit through the circuit, will
- Warmly received in the evaporator + heat compression
- This last, again not a small fire, profit and losses of the power input to the compressor, giving
- Evaporator load + compressor input power = capacitor load
Capacitor load stated rate of heat dissipation. Some manufacturers give ratings in terms of the burden on the evaporator, together with de-rating factor, which depends on temperature of evaporation and condensation.
Evaporator load X factor = capacitor load
The provision of a separate oil cooler reduces the load capacitor amount of heat is lost to the oil and remove the oil cooler. This special attention, with oil-injected screw compressors with a high share of energy compressor taken in oil. This share depends on the method of cooling oil, and figures should be obtained from the compressor manufacturer for the specific application.
....
|
Condensers and cooling towers 