Home 

Ref-Wiki.com -

Technical information Industrial Assembling Refrigeration Systems

Installation Of Refrigeration Systems

When repairs have been made and tested parts, the system must be correctly installed. Four frameworks should be followed when installing parts refrigerating machines:
  • Clean and dry each part will be entered into the system
  • Clear and evacuate the part of the system, which was opened by using the proper equipment.
  • Leak testing.
  • Starting and adjustment of the device.
Installation of refrigerating mechanism in the field, without foreign inclusions entering the system difficult. It is almost impossible to keep dirt and moisture from the system. Filter-driers are necessary for the removal of this question. They are installed in the liquid line and suction line system.

Service call should be made in the next day or two after repair. You should check on the working pressure and General condition of the refrigerator. If possible, attach the registrars of the temperature and pressure in the system for 24 hours...

 
Thanks ->
Automatic expansion valve wiki Compound refrigeration system Continuous vapour absorption system Diffuser size per cfm Hair humidistat Hot gas defrost Refrigeration capillary tube replacement Refrigeration capillary tube sizing chart Refrigerator compressor wiring diagram Snf in milk Wikipedia Suction accumulator Surge drum Types of compressors
Copyright @ 2009 - 2022, "www.ref-wiki.com"