Internal finishing and fittings
The interior surface finish, comply with sanitary norms, files should be clean and free from any cracks which may contain dirt. Bare wood in any form is not allowed. Most of liners aluminum or galvanized steel sheet, finished white with synthetic enamel or plastic coating. GRP liners also in use. Floors made of solid concrete. Protective curbs placed after Paul treated and decreased in size.
In the past, forest litter lats were recorded along the walls to protect the surface from collision damage and to provide air space for air circulation from the evaporators. Since wood is no longer used, separation, can be provided in the form of metal rails. Provision floor roadside in the walls will ensure that the pallets can be stacked to prevent air circulation.
Lighting in higher temperatures, numbers are usually luminescent lamps mounted in the ceiling and having starters temperature is concerned. Low-temperature storage, in General, have high-pressure sodium lamps and possible to obtain the total intensity of illumination 300 Lux with electrical load of 10 W/m2 floor area.
Designing efficient lighting systems merits attention, since all the energy invested in store for lighting should be removed. Control switches are usually outside the entrance door.
Large stores must be equipped with an emergency lighting system, the battery is maintained to enable the routes to the exit, to be well seen in the case of a power outage...
|
Cold storage