Ref-Wiki.com -

Technical information The refrigeration cycle Cooling and dehumidification

Cooling and dehumidification

The cooling load will always be the greatest in the early afternoon, so that no additional start-up capacity is required. The common usage of one coil cooling and dehumidify the air without cooling, heating comfort, will design the balance conditions, only in case of full download. A little different conditions should be taken at another time. Closer control can be obtained by changing the temperature of the coolant and air mass flow through the coil, but such systems can be thrown out of calibration, and measures should be taken to avoid unauthorized changes of the parameters of control or energy will be wasted without any benefit in the final terms...
Thanks ->

Absorbent refrigerant combination Approach temperature Bare tube evaporator Cooling and dehumidifying coils Electronic expansion valve wiki Evaporating temperature Evaporator construction Finned tube evaporator Gas furnace operation P. H. diagram Properties of ideal refrigerant Rotary compressor construction Shell and coil evaporator
Copyright @ 2009 - 2022, "www.ref-wiki.com"