Methods of Lubrication: Forced lubrication method Splash lubrication in referigeration compressor

Forced lubrication method - Splash method of lubrication in compressor

Technical information Industrial Methods of Lubrication

The Methods Of Lubrication

Screensavers and forced two lubrication strategies are used in refrigeration compressors. Methods compressor lubrication vary, depending on the type and size of the compressor and its manufacturer. Usually employed lubrication methods can be grouped into two categories, screensavers method and pressure feed. As a rule, small, vertical, compressors, concluded after 15 HP (11.2 kW) splash lubrication.

As input power requirements exceeding this limit, the most compressors use of specific types of forced greasing. It is also common to use a combination of screen saver and forced strategies in a single compressor. Forced lubrication increases the cost of the compressor so that it is applicable only in very small compressors of critical and high-ena equipment.


Thanks ->

Crankcase heater High side float valve Hot air furnace wiring diagram Lennox pulse furnace troubleshooting Low pressure chillers Low side float valve Natural convection condenser Potential relay and current relay R404a wiki R407c vs r134a Single screw compressor Two stage cascade refrigeration system Types of metering devices
Copyright @ 2009 - 2017, "www.ref-wiki.com"