Several Pipeline Evaporator

Another method is to use a cluster system. Here, the different lines are brought to a single point. At this point they arc connected through a hand valve to the collector. A large liquid line and suction starts from the collector to the compressor. This method is not always practical. An example is a situation when a single evaporator located some distance away from the window. In this case, the duplication of long runs required. The variety of the installation code located on a wall near the condensing unit.

Every curve and a valve in the pipe system gives a reduction of refrigerant flow. litis is the result of the friction caused by bending or the valve. Therefore, it is important to keep bends and valves used in the system to a minimum. Inner parts of valves, dryers, filters and sight glasses should be removed during soldering pipes to them. Or, the part can be concluded with a wet cloth or some of the heat sink. Do not allow moisture to enter the valve...