There are a lot of different samples of ice. The easiest used in domestic refrigerators mechanisms, freezes water in ice cube trays. Most of the artificial ice, for cooling of drinks. Therefore, the ice in other forms than Cuba and in smaller sizes, it is often desirable. One type of ice produces ice flakes. The water flow through the evaporator shape of a cylinder. Evaporator surface is cold (0F or 18C) so that the water quickly freezes. Control of water level. The locking mechanism is located in the bunker. It stops the production of ice, when the tank is full.
Ice can be formed in many forms. Square or cy-Imdrically the shape of a cube can be created by the pipe inside the tube. Electrical circuits of the need to control with automatic ice makers. They include bin level controllers, ice cube size control, and water pump control. Small ice cube manufacturers often used in fast food restaurants. Line drawing basic ice cube maker. The unit with the panels removed shown in Fig. 13-68. The main components of the system are:
Evaporator.
Automatic expansion valve.
Gearbox.
Water reservoir.
Water is delivered to the inlet of the water and passes through water supply Assembly.
Water enters the bottom of the evaporator and freezes on the evaporator of the cylinder. Screw inside the evaporator freezer ice is moving up in the bunker. When filling hopper, ice that makes switch off the ice flow. The ice flow off until Ben process is terminated or until needed again.
It is very important to follow the plumbing code in the pipelines of the water drain. Loss of water pressure in the water supply system may produce adverse selection. It can lead to contamination of drinking water in the building...
Industrial