The Evaporator Pressure-Regulating Valve Location

ORITs must be installed before any other line suction control or accessories. These valves can be installed in the position most suited to the application. However, these valves shall be located so that they do not carry out oil trap, or to solder doesn't work in the internal parts of the soldering processes in the suction line. Because these valves are sealed, they cannot be disassembled to remove solder trapped in the inner part. Installation of the filter-dehydrator and strainer, it may be worth the cost of maintaining the system is clean and efficient. Soldering procedures are the same as for other valves of this type. Spool access valve comes in an envelope attached to the access valve. If access connection of the valve is used as a reusable pressure click to check the setting of the valve, OBIT should be soldered in front of the core is installed. This protects the synthetic core material. If access valve is used as a constant pressure of the press, core and access valve cover can be discarded.