A Limited Flow Of Water
If the flow of water is insufficient, the cause can be:
- A drain valve.
- Scored the screen.
- Knock valve.
- Valve incorrectly adjusted.
- Sediment-bound valve.
- Leak furs.
In addition to these possible problems, water cooling system can also be the cause. Some water cooling system using a length of rubber or plastic hoses between sections of the water pipeline. This hose is run along the wall and condensing unit water lines. This prevents the condensing unit vibration in the building of the plumbing system. It also prevents damage to pipes, caused by the vibration. Cold water inlet hose does not represent any difficulties. This hose is usually give many years of service. However, wrater outlet hose may decompose and score.
Sometimes someone may partially or completely disable the water supply. This occurs when the manual valve installed in the system is closed. You should always put signs near valves, warning effect on the unit, if these valves are closed.
There are two common features that indicate problems with water circulation. One is the lack of cooling in the condensing unit. Another-too much water.
If the circulation of the water stopped, the refrigeration system will short-cycle. In the high-pressure causes a short Cycling. These systems are always in the presence of high-pressure safety control engine for this purpose. As head of the machine builds (due to the lack of cooling), control opens the engine stop switch. As soon as the engine stopped, the head pressure drops off rapidly. This allows the high pressure control to turn the motor again. Short Cycling will continue until the trouble is remedied. This condition is heavy load on the engine. In addition, it does not provide a satisfactory cooling...
|
Industrial