Fittings
The commercial potential of the system has been growing steadily over the last few years. This is especially true with comfort cooling plants in air conditioning systems and in supermarkets.
Liquid line and suction sizes in these facilities can be as large as 6" (153 mm) OD. Solder pot fittings are used. These fittings are made of wrought or extended copper. They are deepening, large enough to receive the hard copper tubes.
It is important that hard soldering copper pipe connections to be masterfully done. Otherwise, some serious trouble can lead (bad joints and leaks). Hard drawn copper pipe seamless. She usually has greater wall thickness than annealed copper pipes. It is available in a 10' or 20' (3.04 or 6.1 m) in length, and not in rolls. Ends either limited or closed. When you install this type of use of flux and solder recommended by the manufacturer. Connecting surfaces must be clean and ends of the tubes must be square. This will prevent the flow or compounds of metals with the management of the pipe...
|