Херметички компресори

Херметички компресор directly to the compressor with direct connected motor компресор Assembly has the steel case. It is designed for pump низак притисак refrigerant gas high pressure.

Pressurized container, tightly closed so that no gas or liquid may enter or escape. Welding container seal.

Hermetic compressors Tecumseh low pressure shell, or housing. This means that the interior of the compressor housing is regulated only усисни притисак. He is not subject to discharge created with the help of the piston. This point is emphasized in order to emphasize the danger of introduction of high-pressure gas компресор shell pressures over 150 pounds per square inch.

Major of internal parts херметички компресор are shown in Fig. 9-10. The suction is drawing in the compressor shell and then by an electric motor that provides power to the crankshaft. The crankshaft rotates in bearings, the movement of a piston or pistons in цилиндр or cylinders. The crankshaft is designed for transportation of oil from the oil pump at the bottom of the compressor for all bearing surfaces. REFRIGERANT gas surrounds the crankcase of the compressor and motor, as it passes through the compressor shell and the cylinder, through the suction muffler and suction valves. The gas is compressed pistons, and went out through a pressure relief valves silencer, and the compressor discharge tube.

..