Split packages
To avoid these limitations, in which all the pieces into one package, the evaporation can be broken with a condenser and compressor will either (see Fig. 13.9). The device is designed as a complete system, but the two parts are separate and connected on site. Several small units, flexible pipes for the refrigerant can be provided. More split packages should be piped to the site using conventional methods, and then processed and charged as to open the plant. The height of the block split evaporator above capacitor may be limited and the supplier's instructions must be observed. Cm. also multi-splits.
Evaporator kits supplied as part of the split package or for applications with the condensing unit, are divided into three main types:
- Air conditioning with air cooling coil with a drip tray under the expansion valve, the fan and the electric motor, air filters, lattice inlet and outlet. They may also include shock absorbers and branch pipes for return and fresh air, heaters, humidifiers and controls.
- Cooling evaporators, with coil with a drip tray under the fans, and perhaps an expansion valve.
- Cooling evaporators for use below +2C defrost elements.
..
|