Ref-Wiki.com -

Technical information Compressors Cooling


Cold suction gas provides cooling compressor sufficient to save the little machine at an acceptable operating temperature. Refrigerants with high discharge temperature (mainly ammonia) require the use of water-cooled cylinder heads. Oil coolers are required under certain conditions, which will be specified by the manufacturer. This can be water-cooled or take the refrigerant from the system.

Compressors, as a rule, overheating under the low mass flow conditions resulting from abnormally low suction pressure or long running with capacity reduction. Detectors should be installed to warn against this state of...

Thanks ->

Double tube condenser Evaporator Fans and blowers Wikipedia Hermetically sealed compressor High pressure float valve Hot gas muffler Oil separator Open air refrigeration cycle Plate surface evaporator R729 refrigerant Solenoid valve Specific volume of refrigerant T. H. diagram
Copyright @ 2009 - 2020, "www.ref-wiki.com"